You can apply for 0% finance in-store or on the phone, it’s a very popular way to pay for your new bike and spread the cost! You can call us now on 01202 775588 and we can talk you through an application which only takes 5 minutes. You can also call our Poole store on 01202 749674. Alternatively fill your details above and one of our team will be in contact shortly to discuss further.
£1,237.50 a month
We love the fast and planted feeling of the new Stumpjumper, but not everyone needs 150mm of travel. And if you're in the market for a trail bike that's more nimble and snappy in hard accelerations and long climbs, the S-Works Stumpjumper ST 29 should be your first choice. Its shorter travel (130mm front/120mm rear), and slightly steeper geometry, bring out the true 'feel' of the trail—making popping off lips and railing berms even more lively and fun.
Our design goal for the new Stumpjumper was simple—build the ultimate trail bike, one that feels telepathic. And it turns out that this feeling all comes down to stiffness. Think of it this way: when the frame's telling your hands one thing and your feet another, your brain gets confused with the imbalance and the bike feels unstable. In order to fix this, we had to get to work on dialing-in the materials, shapes, and the layout.
We started by creating our own mountain-specific stiffness test, and then we looked at the layout with Finite Element Analysis (FEA) to see where we could get the biggest stiffness improvements. This led to a big discovery: The Large and X-Large frames needed more front-end stiffness while the Smalls and Mediums were just fine. We were able to create a frame design that was 20% more efficient. And in the end, this proved to be one of the lightest trail frames on the market, today.
When designing the frame with the stiffness targets being a main goal, we developed a radical new sidearm design. The front-end and rear-end are connected at three points, and the sidearm helps keep all these points super stiff and connected, all while taking about 100 grams out of the rear-end. More explicitly, this minimizes frame flex when the rear suspension is active.
We continued down the suspension path with a custom Rx Trail Tune on both the fork and rear shock. Suspension performance is highly dependent on frame, wheel, and rider size, so we use our Rx Tune to get each bike to land in the middle of the adjustment spectrum, and this gives you the biggest possible range to fine-tune your ride. Another focal point of the tune was matching the suspension characteristics between wheel sizes—we developed a specific Rx Tune for each platform. So, no matter what wheel size you prefer, you'll get perfectly linear suspension.
Steps were also taken to make this bike easy to live with. Threaded bottom brackets make a triumphant return, and we made room for up to a 3.0' tyre. You're also free to run whatever aftermarket rear shock you want, since we're using standard metric shocks. We revamped the SWAT™ box, too, making it sleeker, lighter, and with more volume. And customization is furthered with a Flip Chip that lets you to dial-in your Stumpy to your riding style. Switch it from High to Low and it drops your bottom bracket 6mm and slackens the head tube by half-a-degree. Little details also jump out to surprise you, like a newly designed ribbed chainstay protector that makes chain slap a thing of the past and nearly silences the drivetrain. Lastly, we seriously couldn't make cable routing any easier on carbon models. Full tubes can be found throughout the carbon frame, so all you have to do is push the cable and it'll come out the other end. No more lazy loop, hidden stashes of magnets, pokey spokes, or pillows to cry in.
The build features only top-of-the-line parts, like a full SRAM XX1 Eagle drivetrain, SRAM Guide RSC disc brakes, FOX Factory front and rear suspension (130/120mm respectively), and the best carbon wheels money can buy, the Roval Traverse SL 29s.
- The Stumpjumper ST's asymmetrical, FACT 11m carbon fibre construction is lightweight, stiff, and ready for technical climbs and rowdy descents. It's built off of our 29 Trail Geometry, so it's both capable and comfortable. And with SWAT™ integration in the down tube, a threaded BB, easy cable routing, and an brand new chain silencer, it's ready for anything the trail, or you, throw at it.
- The FOX DPS Factory rear shock features our Rx Trail Tune, ensuring that no matter the wheel or frame size, your bike is dialed-in perfectly.
- With the legendary FIT4 damper, large and lightweight stanchions, and buttery-smooth Kashima coating, the FOX 34 Factory 130mm fork is one of the best out there.
- Tech Specs
Frame FACT 11m, full carbon chassis and rear end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 120mm of tra Fork FOX FLOAT 34 Factory, FIT4 damper, 3-position adjustment, Kashima Coating, 15x110mm Kabolt axle, 51mm offset, 130mm of travel Rear Shock FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x42.5mm Stem Syntace MegaForce 2, 6-degree, 31.8mm clamp Handlebars Specialized Trail, FACT Carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm Grips Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness Front Brake SRAM Guide RSC, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm Rear Brake SRAM Guide RSC, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm Rear Derailleur SRAM XX1 Eagle, 12-speed Shifters SRAM XX1 Eagle, trigger, 12-speed Bottom Bracket SRAM GXP Cassette SRAM X01 Eagle, 12-speed, 10-50t Chain SRAM XX1 Eagle, 12-speed Crankset SRAM XX1 Eagle, Boost™ 148, 170mm crankarm, 24mm spindle - 30T Front Wheel Roval Traverse SL 29, hookless carbon, 30mm inner width, tubeless ready, hand-built, 24/28h Rear Wheel Roval Traverse SL 29, hookless carbon, 30mm inner width, tubeless ready, hand-built, 24/28h Front Tyre Butcher, GRID Casing, GRIPTON® compound, 2Bliss Ready, 29x2.3" Rear Tyre Purgatory, GRID casing, GRIPTON® compound, 2Bliss Ready, 29x2.3" Saddle Body Geometry Phenom Expert, Adaptive Edge design, hollow titanium rails, carbon fiber base, 143mm Seatpost Command Post IRcc, 16-position micro-height adjustable, two-bolt head, bottom mount cable routing, remote SRL lever, 34.9mm, S: 130mm, M/L/XL: 160mm of travel
Customer ReviewsWrite a Review
Be the first to write a review!
Write a Review
Write a review about the Specialized 2019 S-WORKS STUMPJUMPER ST 29 Mountain Bike by completing the form below. Please complete all fields marked with an *
This item is available for delivery within the EU only. For orders outside the UK, please contact us for a quote. Read more.
UK orders are sent using Royal Mail Tracked 48, Royal Mail Recorded or Royal Mail letter post for small, light orders and Parcelforce for heavier, bulky orders. Please allow approx 2-3 days for delivery after the order has been despatched. Large and heavy items, e.g turbo trainers and work stands, will be sent by Parcelforce (UK Mainland only). Overseas orders are sent using Royal Mail International Signed For service and Royal Mail Airsure service (where permitting). Heavier items e.g. bicycles are sent using Parcelforce Worldwide. Delivery times will vary depending on destination, customs clearance, local postal service etc. Please allow up to 14 working days for delivery. Postage costs include Insurance for the value of the order. Bicycles sent within the UK are sent by Parcelforce 48 Hour Service.